0.91 Inch 128×32 IIC I2C White / Blue OLED LCD Display DIY Module SSD1306 Driver IC DC 3.3V 5V for arduino


SKU: 32879702750 Category:

Dear buyer:

If you choose the “economic” mode of transportation, then in the peak season of logistics, some countries will delay receiving packages for a while. If you cannot accept the delay, then please choose airmail, faster transportation and protection.

We provide customized services and a greater number of priority services. You can contact me when you need more quantity and customized solutions.You will get a discount “exclusive” VIP price. Look forward to working with you! I will be your best supplier: S+S+S+

Collect my store, become my fans, in my store discount activities, fans will get a higher VIP discount!

Buying Tip: When you receive the product, the product appears ”subtle scratches, broken, bent pins”, in the case of no effect on the use, I will not accept your controversy, if you do not agree, please do not in my The purchase of the store, of course, if you accept this subtle product situation, in a reasonable case, when we avoid the dispute, I will be able to offer you some discounts on your new order.

0.91 4Pin OLED

OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.

Driver IC: SSD1306

Size: 0.91 inch OLED

Resolution: 128 x 32

IIC interface

Display Color: White / Blue

Pin Description:

GND: Power Ground

VCC: Power + (DC 3.3 ~5v)

SCL: Clock Line

SDA: Data Line

0.91 LCD White

How to connect:

GND: Power Ground

VCC: Power + (DC 3.3 ~5v)

SCL: Clock Line

SDA: Data Line


Driver IC: SSD1306, IIC interface

Resolution: 128 x 32

Display Color: White

Size: 4x1cm/1.57×0.39″

0.96 4Pin OLED

Interface type: IIC interface

Pin definition: GND, VCC, SCL, SDA

1.GND(OLED power supply

2.VCC (OLED 3.3~5V)

3.SCL(OLED IIC Clock line)


Note:0.96 4Pin OLED can only use IIC interface

0.96 7 Pin OLED

1, high resolution: 128X64 (and 12864LCD the same resolution, but the OLED screen more pixels per unit area)

2, super wide viewing angle: more than 160 ° (maximum viewing angle display a screen)3, ultra-low power consumption: normal display 0.06W (far below the TFT display)

4, wide supply range: DC 3V-5V (without any changes, directly compatible with common 3.3V and 5V power supply system)

5, industrial grade: Operating temperature range -30 C ~ 70 C

6, the ultra-small size: (length) 27.8MM * (W) 27.3MM * (thickness) 4.3MM

7, support for multiple operating modes: 3-wire SPI, 4 wire SPI

8, with chip select CS signal, you can achieve multiple SPI device on the same bus work

9, compatible with 3.3V and 5V control chip I / O level (without any set, directly compatible)

10, OLED screen, internal drive chip: SSD1306

Pin Description:

GND: Power ground

VCC: 3.3V or 5V power supply

D0: CLK Clock

D1: MOSI data

RST: Reset

DC: data / command

CS: Chip select signal

Note:0.96 7Pin OLED can only use SPI interface

  • 1.3 4Pin OLED

  • 100% brand new and high quality

    Resolution: 128*64

    Display area: 29.42 x 14.7mm/1.16″*0.58″

    Driving voltage: 3.3-5V

    Operating temperature: -40 ° to 70 °

    Interface type: IIC interfac

    Pin definitions:

    1> GND (power ground)

    2> VCC (positive power supply)

    3> SCL (clock line)

    4> SDA (data line)

1.3 7Pin OLED

Please don’t open dispute and leave any bad feedback, if you have any question, feel free to contact us,we will give you satisfactory answer. Hope you understand us, thank you in advance.

Your satisfaction and positive feedback is very important to us. Please leave positive feedback and 5 stars if you are satisfied with our items and services.

If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback. We will do our be

st to solve any problems and provide you with the best customer service.

When you place an order, please choose a shipping method and pay for the order including the shipping fee. We will send the items within 5 days once your payment is completed.

We do not uarantee delivery time on all international shipments due to differences in customs clearing times in individual countries, which may affect how quickly your product is inspected. Please note that buyers are responsible for all additional customs fees, brokerage fees, duties, and taxes for importation into your country. These additional fees may be collected at time of delivery. We will not refund shipping charges for refused shipments.

The shipping cost does not include any import taxes, and buyers are responsible for customs duties.

All order will ship out in 1-5 buiness after payment verify .Pls wait in patient.

China Post mail is not fast , Usally need 15-60days arriived.If in urgent .Pls choose DHL/ Fedex/EMS.We can write low value for cutomer if in need!

China Post Ordinary Small Packet Plus just can track to the domestic of our country,but it not effect your receiving.

China Post Ordinary Small Packet Plus and China Post Registered Air Mail all can track in

Brand Name


Display Mode


Model Number

0.91 inch / 0.91 LCD /0.91 / LCD/128×32








There are no reviews yet.

Be the first to review “0.91 Inch 128×32 IIC I2C White / Blue OLED LCD Display DIY Module SSD1306 Driver IC DC 3.3V 5V for arduino”

Your email address will not be published. Required fields are marked *